Hinweis zu Cookies
Badger Meter Europa GmbH möchte Ihnen den bestmöglichen Service bieten. Dazu speichern wir Informationen über Ihren Besuch in sogenannten Cookies. Durch die Nutzung dieser Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Detaillierte Informationen über den Einsatz von Cookies auf dieser Webseite erhalten Sie durch Klick auf mehr Informationen. An dieser Stelle können Sie auch der Verwendung von Cookies widersprechen und die Browsereinstellungen entsprechend anpassen.

bookmark list []


Enter your username and password here in order to log in on the website:

Dynasonics® DFX

Doppler ultrasonic flow meter

Ultraschall-Durchflussmessgerät DFX mit Transducer
  • Non-intrusive, clamp-on sensor for most pipes from DN 6 to DN 1500 (¼" to 59”).
  • Wide velocity range: 0.05 to 9 m/s (0.15 to 30 ft/s).
  • Flexibility: with automatic gain control and in-fieldlinearization, the DFX will adapt to a wide variety of applications.
  • Inherent immunity to VFD and other electronic / ultrasonic noise.
  • Hot-tap insertion probe sensor available for concrete, FRP/GRP, or wood stave pipes.
  • Microprocessor-based system; configuration and accumulation data stored in non-volatile flash ROM.
Water, Lubricant oil
max. flow:
from 0.85 up to 3945213 l/min
from -40 up to 90 °C
Water & waste water industry, Chemical industry, Pharmaceutical industry, Food & beverage industry, General industry, Oil industry
Dynasonics® DFX
Dynasonics® DFX

General information

No CE approval.


Two sensor types are available with the DFX meter:

Series DT9 clamp-on, non-intrusive sensor is recommended for use on most pipes, constructed from metal or plastic. The DT9 is rated to Type 6 (IP67) and has the ability to work with temperatures up to +200 ºC (+400 ºF).

Series DP7 hot-tap insertion probe sensor is available for installations on pipe systems that do not permit ultrasound penetration. The DP7 inserts into the pipe wall and directly contacts the flowing liquid.

Technical data

Liquid typesFluids with a minimum of 100 ppm* useful suspended sound reflectors greater than 35 microns, and at least 25 % of the total particle volume is greater than 100 microns
Pipe sizesDN 6 up to DN 1500
Accuracy±2 % full scale
Power supply115/100/230 VAC 50/60 Hz ±15 % @ 17 VA max.; 12 – 28 VDC @ 7 VA max.
Ambient conditions-40 °C up to +85 °C
Velocity range0,05 up to 9 m/s
DisplayTwo line LCD, LED backlit
*ppm = Particel per million

Measuring principle

Ultrasonic flow meters

Ultrasonic flow meters

Ultrasonic signals are alternately sent in and against the flow direction. Ultrasonic energy bursts are transmitted and received via well-defined paths across the flow stream. The velocity of the flow is accurately measured by the difference in the arrival times of signals from the upstream and downstream transducers. The transit time difference (Δt = t 2 – t 1) determines the average flow velocity.


Dynasonics® WT-2

Dynasonics® WT-2
  • Uses the exclusive micro-computer LSI circuit and crystal time base for highly accuracy measurements
  • A high power of...
AquaCUE® Flow measurement manager

AquaCUE® Flow measurement manager
  • Fast leak detection
  • No special infrastructure required
  • Data retrieval available anytime

Do you have questions on this product?

Your contact person:

Badger Meter Swiss AG
Mittelholzerstrasse 8
CH-3006 Bern