Hinweis zu Cookies
Badger Meter Europa GmbH möchte Ihnen den bestmöglichen Service bieten. Dazu speichern wir Informationen über Ihren Besuch in sogenannten Cookies. Durch die Nutzung dieser Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Detaillierte Informationen über den Einsatz von Cookies auf dieser Webseite erhalten Sie durch Klick auf mehr Informationen. An dieser Stelle können Sie auch der Verwendung von Cookies widersprechen und die Browsereinstellungen entsprechend anpassen.

bookmark list []


Enter your username and password here in order to log in on the website:

Amplifier ModMAG® M5000

for detector type II

Magnetisch-induktiver Durchflussmesser B-MAG I M5000
  • Sizes from DN 15 to DN 600 
  • OIML R49-1 and MID MI-001 approved
  • RS232 Modbus, IrDA, M-Bus®, optional RS485
  • Up to 20 years battery life span
  • LCD display
  • IP 67 / IP 68 protection class
  • Verification Device 
  • Accuracy better than ±0,4% v. M.
  • Measuring range of 0,03 to 10 m/s
max. flow:
from 0.02 up to 170000 l/min
from 0 up to 80 °C
max. pressure:
from 0 up to 100 bar
Water & waste water industry
Amplifier ModMAG® M5000
Amplifier ModMAG® M5000

General information

The ModMAG® M5000 is a battery-powered electromagnetic flow meter with a very high accuracy even at very low flows. The excellent repeatability as well as the above-average battery life makes this innovative water meter indispensable for the water market. Typical applications are leak detection in water networks, water consumption measurements and irrigation plants.

The meter is best suited for applications without a power supply where exact consumption or flow rates are required. Of course, the ModMAG® M5000 can also be used with an available power supply. The meter can be powered with main voltage and in case of a main failure, it is powered by an internal battery. Important data are consequently saved.

The ModMAG® M5000 is designed to comply with OIML R49-1 and MID MI-001.

Technical data

SizeDN 15 – DN 600
Accuracy±0,4 % of actual flow, ±2 mm/s of actual flow
Repeatability0,1 %
Flow range0,03 – 10 m/s
ConductivityMin. 20 μS/cm
Power supplyInternal Lithium batteries 3,6 V Optional battery back-up model (100 – 240 VAC or 9 – 36 VDC)
DisplayLCD, 2 lines
Digital outputs4 x open collector
Digital inputsYes
Analog output
InterfaceModbus RTU RS232 (optional RS485), M-Bus, IrDA
Empty pipe detectionSeparate electrode
Datalogger7.224 measuring values
HousingAluminium, IP 67 (optional IP 68)
Remote versionMax. 30 m
Ambient temperature-20 °C up to +60 °C
ApprovalsOIML R49-1, MID MI-001

Measuring principle

Electromagnetic flow meters

Electromagnetic flow meters

The operating principle of the electromagnetic flow meter is based on Faraday's law of magnetic induction: The voltage induced across any conductor, as it moves at right angles through a magnetic field, is proportional to the velocity of that conductor. The voltage induced within the fluid is measured by two diametrically opposed internally mounted electrodes. The induced signal voltage is proportional to the product of the magnetic flux density, the distance between the electrodes and the average flow velocity of the fluid.


Verification Device

Verification Device
  • Complete verification on site of MAG meter plants without process interruption
  • Cost and time saving: Demounting,...
AquaCUE® Flow measurement manager

AquaCUE® Flow measurement manager
  • Fast leak detection
  • No special infrastructure required
  • Data retrieval available anytime

Do you have questions on this product?

Your contact person:

Badger Meter Swiss AG
Mittelholzerstrasse 8
CH-3006 Bern