Hinweis zu Cookies
Badger Meter Europa GmbH möchte Ihnen den bestmöglichen Service bieten. Dazu speichern wir Informationen über Ihren Besuch in sogenannten Cookies. Durch die Nutzung dieser Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Detaillierte Informationen über den Einsatz von Cookies auf dieser Webseite erhalten Sie durch Klick auf mehr Informationen. An dieser Stelle können Sie auch der Verwendung von Cookies widersprechen und die Browsereinstellungen entsprechend anpassen.

bookmark list []

Login

Enter your username and password here in order to log in on the website:

Flow sensor 228

Metallic tee

Impeller Durchflusssensor 228 B2
  • Flow sensor in T-type
  • To be mounted in the pipe
  • Various materials available
  • Easy flow measurement
  • Rugged construction
  • Reliable
Medium:
Water
max. flow:
from 12 up to 1000 l/min
Temperature:
from 0 up to 100 °C
max. pressure:
from 0 up to 20 bar
Branch:
Water & waste water industry, Chemical industry
Flow sensor 228
Flow sensor 228

General information

The series 228 flow sensors feature a six bladed impeller design with a proprietary non-magnetic sensing mechanism. The forward swept impeller shape provides higher, more consistent torque than four bladed impeller designs and is less prone to be fouled by water borne debris. The forward curved shape coupled with the absence of magnetic drag provides improved operation and repeatability even at lower flow rates. This is especially true where the impeller is exposed to metallic or rust particles found in steel or iron pipes.

As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate. The signal can travel up to 600 m between the flow sensor and the display unit without the need for amplification.

All sensors except irrigation versions are supplied with 6 m of 2-conductor 20 AWG shielded U.L. type PTLC 105°C cable.

The tee mounted flow sensors consist of a standard 220 BR or 220 SS mounted in a 2" or 2.5" tee.


Technical data

Mounting in pipe sizes DN50 – 65 / 2 – 2,5“
Flow range in m/s (standard)0,15 – 9
Flow range in m/s (low flow)-
Accuracy (full scale / Qmax.)±1 %
Accuracy (of reading)-
Repeatability (full scale / Qmax.)±0,3 %


Measuring principle

Impeller meters


Impeller meters

The series feature a six-bladed impeller design with a proprietary, non-magnetic sensing mechanism. The impeller shape coupled with the absence of magnetic drag provides accuracy and repeatability throughout the flow range of the sensors. As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate.


Accessories


Flow Computer FC5000
Cox

Flow Computer FC5000
  • Scaled pulse output: 2 analog outputs or 2 frequency outputs available
  • 1 relay output
  • Communication via EIA-485 ModBus®...
Transmitter 330

Transmitter 330
  • Relay output
  • Parametering vial PC/Laptop
Dual channel monitor 3100/Controller/Transmitter

Dual channel monitor 3100/Controller/Transmitter
  • Control panel mounted
  • Pump control based on flow and pressure
  • Pump control based on level and pressure
  • Water feature...
Transmitter 310

Transmitter 310
  • 4 – 20 mA analogue output
  • Parametering via PC/Laptop
Transmitter 340 BTU

Transmitter 340 BTU
  • Can be combined with all flow sensors
Monitor 3000

Monitor 3000
  • Wall mounted
  • Control panel mounted
Transmitter 340 LW

Transmitter 340 LW
  • BTU
  • Signal conversion to Lonworks® networks
Transmitter 320

Transmitter 320
  • Scalable pulse transmitter
  • Parametering via PC/Laptop
Transmitter 340 N2

Transmitter 340 N2
  • BTU
  • Signal conversion to Johnson Controls Metasys® networks

Do you have questions on this product?

Your contact person:

Badger Meter Swiss AG
Mittelholzerstrasse 8
CH-3006 Bern