- In PVC T-type
- To be glued in a PVC pipe system
- Suited for corrosive fluids
Medium:
Water
Water
max. flow:
from 12 up to 4200 l/min
from 12 up to 4200 l/min
Temperature:
from 0 up to 60 °C
from 0 up to 60 °C
max. pressure:
from 0 up to 10 bar
from 0 up to 10 bar
Branch:
Water & waste water industry, Chemical industry, HVAC
Water & waste water industry, Chemical industry, HVAC
General information
These models feature a modified PVC tee with solvent weld socket end connections and a removable, PPS or PVDF sensor insert. Sizes of 1 1/2", 2", 3" and 4" are available.
Technical data
Mounting in pipe sizes DN | 32 – 100 / 1,5 – 4“ |
Flow range in m/s (standard) | 0,15 – 9 |
Flow range in m/s (low flow) | - |
Accuracy (full scale / Qmax.) | ±1 % |
Accuracy (of reading) | - |
Repeatability (full scale / Qmax.) | ±0,3 % |
Downloads
The login area provides you with additional information if you have access authorization.
Measuring principle
Impeller meters

The series feature a six-bladed impeller design with a proprietary, non-magnetic sensing mechanism. The impeller shape coupled with the absence of magnetic drag provides accuracy and repeatability throughout the flow range of the sensors. As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate.
Applications

Impeller meters in the supply of chilled or hot water
Accessories
Flow Computer FC5000
- Scaled pulse output: 2 analog outputs or 2 frequency outputs available
- 1 relay output
- Communication via EIA-485 ModBus®...
Dual channel monitor 3100/Controller/Transmitter
- Control panel mounted
- Pump control based on flow and pressure
- Pump control based on level and pressure
- Water feature...
Do you have questions on this product?
Your contact person:
Badger Meter Swiss AG
Fax. + 41 31 931 08 67
info @badgermeter.ch