- Non-magnetic sensing technology
- Flow rate and totalizer
- PVC and irrigation models
- Accurate reading
Water
from 6 up to 290 l/min
from 0 up to 37 °C
from 0 up to 10 bar
Water & waste water industry, Pharmaceutical industry
General information
The Flow sensor 735 is used in conjunction with any Badger flow monitor or transmitter, Badger Meter non-magnetic impeller flow sensors provide an accurate reading of the rate of liquid flow as well as total accumulated flow.
A number of sensor models are offered, which cover applications for a wide range of pipe sizes and pressure/temperature specifications. The flow sensors generate a frequency which is proportional to the flow rate. An internal preamplifier allows the pulse signal to travel up to 600m (2000 feet) without further amplification.
The impeller bearing as-sembly, shaft and o-rings are replaceable in the field.
Badger Model 735 impeller flow sensors feature a fourbladed impeller design, using a proprietary, non-magnetic sensing technology. As the liquid flow turns the impeller, a low impedance signal is transmitted with a frequency proportional to the flow rate. Sensors of similar type are interchangeable, so there is no need for recalibration after servicing or replacement.
Measuring principle
Impeller meters

The series feature a six-bladed impeller design with a proprietary, non-magnetic sensing mechanism. The impeller shape coupled with the absence of magnetic drag provides accuracy and repeatability throughout the flow range of the sensors. As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate.
Accessories
- Control panel mounted
- Pump control based on flow and pressure
- Pump control based on level and pressure
- Water feature...