Hinweis zu Cookies
Badger Meter Europa GmbH möchte Ihnen den bestmöglichen Service bieten. Dazu speichern wir Informationen über Ihren Besuch in sogenannten Cookies. Durch die Nutzung dieser Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Detaillierte Informationen über den Einsatz von Cookies auf dieser Webseite erhalten Sie durch Klick auf mehr Informationen. An dieser Stelle können Sie auch der Verwendung von Cookies widersprechen und die Browsereinstellungen entsprechend anpassen.

bookmark list []

Login

Enter your username and password here in order to log in on the website:

Dynasonics® TFX-5000

Transit Time Flow Meters

Ultraschalldurchflussmessgerät TFX 5000 / Ultrasonic flow meter TFX 5000
Ultraschalldurchflussmessgerät TFX 5000 / Ultrasonic flow meter TFX 5000
  • Large, bi-directional flow measuring range
  • Reduced installation time and cost
  • No moving parts to maintain or replace
Medium:
Water, Lightly aggressive fluids, Lubricant oil, Water-based fluids, Liquid food
Temperature:
from -20 up to 60 °C
Branch:
Water & waste water industry, HVAC, Chemical industry, Pharmaceutical industry, Food & beverage industry, General industry, Oil industry
Dynasonics® TFX-5000
Dynasonics® TFX-5000

General information

The TFX-5000 transit time meter measures volumetric flow and heating/cooling energy rates in clean liquids as well as those with small amounts of suspended solids or aeration, such as surface water or sewage.

TFX-5000 ultrasonic flow and energy meters clamp onto the outside of pipes and do not contact the internal liquid.


Technical data

Liquid typesMost clean liquids or liquids containing small amounts of suspended solids or gas bubbles
Repeatability0.2% of reading
Power Options24V DC/AC or Mains AC
EnclosureNEMA Type 4X, IP67
Ambient Temperature Range-4…140° F (-20…60° C)
Storage Temperature Range-40…176° F (-40…80° C)


Measuring principle

Heat meters


Heat meters

The heat meters use the highly precise ultrasonic transit time measuring principle, for which two ultrasonic sensors are externally mounted on the pipeline and connected to the electronic. The ultrasonic sensors work alternately as transmitter and receiver, and mutually send ultrasonic signals. During these transmissions, the respective signal transit times of the to-and-from signals (t1, t2) are measured.  

The electronic measures the difference of the transit time of the ultrasonic signals going with and against the flow direction t1 and t2. These signals are either decelerated or accelerated by the medium flow. The difference produced in both signal transit times is proportional to the flow rate and is used together with the pipeline geometry for a precise flow calculation


Do you have questions on this product?

Your contact person:

Badger Meter Swiss AG
Mittelholzerstrasse 8
CH-3006 Bern