Hinweis zu Cookies
Badger Meter Europa GmbH möchte Ihnen den bestmöglichen Service bieten. Dazu speichern wir Informationen über Ihren Besuch in sogenannten Cookies. Durch die Nutzung dieser Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Detaillierte Informationen über den Einsatz von Cookies auf dieser Webseite erhalten Sie durch Klick auf mehr Informationen. An dieser Stelle können Sie auch der Verwendung von Cookies widersprechen und die Browsereinstellungen entsprechend anpassen.

bookmark list []

Login

Enter your username and password here in order to log in on the website:

Amplifier ModMAG® M2000

for all detectors

M2000
  • DN6 - DN2000
  • High Accuracy
  • ModBus®, HART, Profibus DP, M-Bus
  • LCD display
  • Power supply 85 – 265 VAC / 9 - 36 VDC
  • IP67 housing
  • Integrated data logger
  • Verification Device
Medium:
Water, Liquid food
max. flow:
from 0.05 up to 2262000 l/min
Temperature:
from -40 up to 150 °C
max. pressure:
from 0 up to 100 bar
Branch:
Water & waste water industry, Food & beverage industry, Chemical industry, Automotive industry, General industry, Pharmaceutical industry
Amplifier ModMAG® M2000
Amplifier ModMAG® M2000

General information

The amplifier type ModMAG® M2000 is best suited for bidirectional flow measurement of fluids with a conductivity > 5 µS/cm (> 20 µS/cm for demineralized water). ModMAG® M2000 shows a high accuracy, is easy to use and can be chosen for a large and flexible applications spectrum.

The backlit, four-line display shows all actual flow measuring data, daily and complete information, including alarm messages.

The standard amplifier has 4 programmable digital outputs, one digital input, power output and USB interface. Integrated test tools make the putting into operation and the service easier.


Technical data

SizeDN 6 – DN 2000
Accuracy±0,2 % of actual flow, ±1 mm/s of actual flow
Repeatability0,1 %
Flow range0,03 – 12 m/s
ConductivityMin. 5 μS/cm (min. 20 μS/cm for demineralized water)
Power supply85 – 265 VAC (50/60 Hz) < 20 VA, optional 9 – 36 VDC
DisplayLCD 4 lines / 20 characters
Digital outputs4 x open collector, 2 x relays
Digital inputsYes
Analog output0/4 – 20 mA, 0/2 – 10 mA
InterfaceModBus® RTU RS232/RS485, Profibus DP, M-Bus, HART®
Empty pipe detectionSeparate electrode
Datalogger10.000 measuring values (optional)
HousingAluminium, IP 67
Remote versionMax. 100 m
Ambient temperature-20 °C up to +60 °C
ApprovalsOIML R49-1, MID MI-001


Downloads


Measuring principle

Electromagnetic flow meters


Electromagnetic flow meters

The operating principle of the electromagnetic flow meter is based on Faraday's law of magnetic induction: The voltage induced across any conductor, as it moves at right angles through a magnetic field, is proportional to the velocity of that conductor. The voltage induced within the fluid is measured by two diametrically opposed internally mounted electrodes. The induced signal voltage is proportional to the product of the magnetic flux density, the distance between the electrodes and the average flow velocity of the fluid.


Accessories


Heat calculator model 212

Heat calculator model 212
  • Complies with OIML R75 and EN1434 standards
  • Provides multilingual capability
  • M-Bus and ModBus® RTU RS 485 options
  • For...
AquaCUE® Flow measurement manager
AquaCUE®

AquaCUE® Flow measurement manager
  • Fast leak detection
  • No special infrastructure required
  • Data retrieval available anytime

Do you have questions on this product?

Your contact person:

Badger Meter Swiss AG
Mittelholzerstrasse 8
CH-3006 Bern