- DN6 - DN500
- Power supply 24 VDC / 115 VAC / 230 VAC
- The low cost alternative
- Accuracy ±0,5 % of actual flow
- Flow range 0,03 – 12 m/s
- Power supply 24 VDC / 115 VAC / 230 VAC
Water, Liquid food
from 0.05 up to 22700 l/min
from -40 up to 150 °C
from 0 up to 100 bar
Chemical industry, Pharmaceutical industry, Water & waste water industry, Food & beverage industry, General industry, Automotive industry
General information
The electromagnetic flow meter ModMAG® M1000 has been designed to fit into the MAG meter series and especially for applications in machinery plants, vehicles and batching processes.
The applications range from DN 6 to DN 500 with the most various process connections like DIN flanges, dairy pipe connections, TriClamp®, etc.
The basic line of ModMAG® M1000 is provided with 24 VDC power supply, without display, with passive outputs and can be programmed via a serial port RS 232 or separate handheld. The device can also, upon request, be factory preconfigured and then just needs to be electrically connected on site.
Technical data
Size | DN 6 – DN 500 |
Accuracy | ±0,3 % of actual flow, |
±2 mm/s of actual flow | |
Repeatability | 0,1 % |
Flow range | 0,03 – 12 m/s |
Conductivity | Min. 5 μS/cm (min. 20 μS/cm for demineralized water) |
Power supply | 92 – 275 VAC (50/60 Hz) < 14 VA, optional 9 – 36 VDC, 4 W |
Display | LCD graphic display |
Digital outputs | 2 x open collector, 1 x relay |
Digital inputs | Yes |
Analog output | 0/4 – 20 mA, 0 – 10 mA |
Interface | Modbus RTU RS232/RS485, ModBus®/TCP, M-Bus, HART® |
Empty pipe detection | Separate electrode |
Datalogger | 30.000 measuring values |
Housing | Aluminium, IP 67 |
Remote version | Max. 50 m |
Ambient temperature | -20 °C up to +60 °C |
Approvals | - |
Downloads
- Datasheet_DE.pdf
- Datasheet_EN.pdf
- Datasheet_PL.pdf
- Datasheet_SK.pdf
- User manual_DE.pdf
- User manual_EN.pdf
- User manual_FR.pdf
- User manual_ES.pdf
- User manual_PT.pdf
- User manual_RU.pdf
- User manual_SK.pdf
- User manual_HART_EN.pdf
- User manual_IP68 kit_EN.pdf
- User manual_M-Bus_DE.pdf
- User manual_M-Bus_EN.pdf
- User manual_ModBusMap_DE.pdf
- User manual_ModBusMap_EN.pdf
- User manual_PC software_EN.pdf
- Wiring diagramm_EN.pdf
- Overview/Flyer_DE.pdf
- Overview/Flyer_EN.pdf
- Overview/Flyer_PL.pdf
- Matrix_Artikelcodierung Anfrage_DE.pdf
- Matrix_Offering code_EN.pdf
- Matrix_Kod ofertowy zapytanie_PL.pdf
- Matrix_Artikelcodierung für Bestellung_DE.pdf
- Matrix_Offering code for order_EN.pdf
- Matrix_Kod ofertowy zamówienie_PL.pdf
- Matrix_Chemical Compatibility Chart_EN.pdf
- Matrix_Conductivity Chart_EN.pdf
- Spare parts_DE_EN.pdf
- Spare parts_FR.pdf
- Spare parts_ES.pdf
- Firmware_M1000_V1.0.15_EN.zip
- Datasheet_Application_EN.pdf
- Datasheet_Application_EN.pdf
Measuring principle
Electromagnetic flow meters

The operating principle of the electromagnetic flow meter is based on Faraday's law of magnetic induction: The voltage induced across any conductor, as it moves at right angles through a magnetic field, is proportional to the velocity of that conductor. The voltage induced within the fluid is measured by two diametrically opposed internally mounted electrodes. The induced signal voltage is proportional to the product of the magnetic flux density, the distance between the electrodes and the average flow velocity of the fluid.
Applications

Drainage control of flow restrictor

MAG meter M1000 to measure accelerator liquid for comcrete manufacturing
Accessories
- Complies with OIML R75 and EN1434 standards
- Provides multilingual capability
- M-Bus and ModBus® RTU RS 485 options
- For...
- Fast leak detection
- No special infrastructure required
- Data retrieval available anytime