Hinweis zu Cookies
Badger Meter Europa GmbH möchte Ihnen den bestmöglichen Service bieten. Dazu speichern wir Informationen über Ihren Besuch in sogenannten Cookies. Durch die Nutzung dieser Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Detaillierte Informationen über den Einsatz von Cookies auf dieser Webseite erhalten Sie durch Klick auf mehr Informationen. An dieser Stelle können Sie auch der Verwendung von Cookies widersprechen und die Browsereinstellungen entsprechend anpassen.

bookmark list []

Login

Enter your username and password here in order to log in on the website:

Amplifier ModMAG® M1000

for all detectors

Magnetisch-induktiver Messumformer Typ ModMAG M1000, electromagnetic amplifier type ModMAG M1000
  • DN6 - DN500
  • Power supply 24 VDC / 115 VAC / 230 VAC
  • The low cost alternative
  • Accuracy ±0,5 % of actual flow
  • Flow range 0,03 – 12 m/s
  • Power supply 24 VDC / 115 VAC / 230 VAC
Medium:
Water, Liquid food
max. flow:
from 0.05 up to 22700 l/min
Temperature:
from -40 up to 150 °C
max. pressure:
from 0 up to 100 bar
Branch:
Chemical industry, Pharmaceutical industry, Water & waste water industry, Food & beverage industry, General industry, Automotive industry
Amplifier ModMAG® M1000
Amplifier ModMAG® M1000

General information

The electromagnetic flow meter ModMAG® M1000 has been designed to fit into the MAG meter series and especially for applications in machinery plants, vehicles and batching processes.

The applications range from DN 6 to DN 500 with the most various process connections like DIN flanges, dairy pipe connections, TriClamp®, etc.

The basic line of ModMAG® M1000 is provided with 24 VDC power supply, without display, with passive outputs and can be programmed via a serial port RS 232 or separate handheld. The device can also, upon request, be factory preconfigured and then just needs to be electrically connected on site.


Technical data

SizeDN 6 – DN 500
Accuracy±0,3 % of actual flow,
±2 mm/s of actual flow
Repeatability0,1 %
Flow range0,03 – 12 m/s
ConductivityMin. 5 μS/cm (min. 20 μS/cm for demineralized water)
Power supply92 – 275 VAC (50/60 Hz) < 14 VA, optional 9 – 36 VDC, 4 W
DisplayLCD graphic display
Digital outputs2 x open collector, 1 x relay
Digital inputsYes
Analog output0/4 – 20 mA, 0 – 10 mA
InterfaceModBus® RTU RS232/RS485, ModBus®/TCP, M-Bus, HART®
Empty pipe detectionSeparate electrode
Datalogger30.000 measuring values
HousingAluminium, IP 67
Remote versionMax. 50 m
Ambient temperature-20 °C up to +60 °C
Approvals-



Measuring principle

Electromagnetic flow meters


Electromagnetic flow meters

The operating principle of the electromagnetic flow meter is based on Faraday's law of magnetic induction: The voltage induced across any conductor, as it moves at right angles through a magnetic field, is proportional to the velocity of that conductor. The voltage induced within the fluid is measured by two diametrically opposed internally mounted electrodes. The induced signal voltage is proportional to the product of the magnetic flux density, the distance between the electrodes and the average flow velocity of the fluid.


Accessories


Heat calculator model 212

Heat calculator model 212
  • Complies with OIML R75 and EN1434 standards
  • Provides multilingual capability
  • M-Bus and ModBus® RTU RS 485 options
  • For...
AquaCUE® Flow measurement manager
AquaCUE®

AquaCUE® Flow measurement manager
  • Fast leak detection
  • No special infrastructure required
  • Data retrieval available anytime

Do you have questions on this product?

Your contact person:

Badger Meter Swiss AG
Mittelholzerstrasse 8
CH-3006 Bern