- Sizes from DN 15 to DN 600
- OIML R49-1 and MID MI-001 approved
- RS232 Modbus, IrDA, M-Bus®, optional RS485
- Up to 20 years battery life span
- LCD display
- IP 67 / IP 68 protection class
- Verification Device
- Accuracy better than ±0,4% v. M.
- Measuring range of 0,03 to 10 m/s
Water
from 0.02 up to 170000 l/min
from 0 up to 80 °C
from 0 up to 100 bar
Water & waste water industry
General information
The ModMAG® M5000 is a battery-powered electromagnetic flow meter with a very high accuracy even at very low flows. The excellent repeatability as well as the above-average battery life makes this innovative water meter indispensable for the water market. Typical applications are leak detection in water networks, water consumption measurements and irrigation plants.
The meter is best suited for applications without a power supply where exact consumption or flow rates are required. Of course, the ModMAG® M5000 can also be used with an available power supply. The meter can be powered with main voltage and in case of a main failure, it is powered by an internal battery. Important data are consequently saved.
The ModMAG® M5000 is designed to comply with OIML R49-1 and MID MI-001.
Technical data
Size | DN 15 – DN 600 |
Accuracy | ±0,4 % of actual flow, ±2 mm/s of actual flow |
Repeatability | 0,1 % |
Flow range | 0,03 – 10 m/s |
Conductivity | Min. 20 μS/cm |
Power supply | Internal Lithium batteries 3,6 V Optional battery back-up model (100 – 240 VAC or 9 – 36 VDC) |
Display | LCD, 2 lines |
Digital outputs | 4 x open collector |
Digital inputs | Yes |
Analog output | – |
Interface | Modbus RTU RS232 (optional RS485), M-Bus, IrDA |
Empty pipe detection | Separate electrode |
Datalogger | 7.224 measuring values |
Housing | Aluminium, IP 67 (optional IP 68) |
Remote version | Max. 30 m |
Ambient temperature | -20 °C up to +60 °C |
Approvals | OIML R49-1, MID MI-001 |
Downloads
- Datasheet_DE.pdf
- Datasheet_EN.pdf
- Datasheet_ES.pdf
- Datasheet_PL.pdf
- Datasheet_SK.pdf
- Datasheet_VI.pdf
- User manual_DE.pdf
- User manual_EN.pdf
- User manual_ES.pdf
- User manual_SK.pdf
- User manual_IP68 kit_EN.pdf
- User manual_M-Bus_EN.pdf
- Wiring diagramm_EN.pdf
- Overview/Flyer_DE.pdf
- Overview/Flyer_EN.pdf
- Overview/Flyer_PL.pdf
- Overview/Flyer_M5000_DE.pdf
- Overview/Flyer_M5000_EN.pdf
- Overview/Flyer_PL.pdf
- Matrix_Artikelcodierung Anfrage_DE.pdf
- Parameter settings_EN.pdf
- Matrix_Offering code_EN.pdf
- Matrix_Kod ofertowy zapytanie_PL.pdf
- Matrix_Artikelcodierung für Bestellung_DE.pdf
- Matrix_Offering code for order_EN.pdf
- Matrix_Kod ofertowy zamówienie_PL.pdf
- Spare parts_DE_EN.pdf
- Firmware_M-Bus/RS485_V2_0_35_EN.zip
- Firmware_M5000_without M-Bus_V1.0.20_EN.zip
- Software_Flow meter tool V1.3.1_DE_EN.zip
Measuring principle
Electromagnetic flow meters

The operating principle of the electromagnetic flow meter is based on Faraday's law of magnetic induction: The voltage induced across any conductor, as it moves at right angles through a magnetic field, is proportional to the velocity of that conductor. The voltage induced within the fluid is measured by two diametrically opposed internally mounted electrodes. The induced signal voltage is proportional to the product of the magnetic flux density, the distance between the electrodes and the average flow velocity of the fluid.
Applications

"Smart River" Projekt in Kenya

ModMAG® M5000 water meter with backup version

ModMAG® M5000 Electromagnetic water meter, battery-powered - The new generation -

ModMAG® M5000 battery-powered water meter with 4 digital outputs and 3 interfaces

ModMAG® M5000 water meter, battery-powered - The evolution -

ModMAG® M5000 – The new generation -
Accessories
- Complete verification on site of MAG meter plants without process interruption
- Cost and time saving: Demounting,...
- Fast leak detection
- No special infrastructure required
- Data retrieval available anytime