- High repeatability
- Sanitary end connections
- Materials comply to FDA requirements
- NIST traceable calibration
Water, Liquid food
from 2.5 up to 1500 l/min
from -101 up to 149 °C
from 0 up to 69 bar
Food & beverage industry, Chemical industry, General industry, Pharmaceutical industry
General information
The FloClean 3-A sanitary turbine flow meter meets the requirements of 3-A sanitary standard number 28-03 and is recommended for use in clean out-of place (COP) and sanitize out-of place (SOP) applications. FloClean uses the most advanced polishing Technology in a durable 316L stainless steel body and was developed for use in the food, beverage and pharmaceutical industries. FloClean provides a local flow rate and volume totalization when used with the Blancett® B2800/B3000, as well as the ability to interface with a variety of PLCs and computers.
Technical data
Material | Housing: 316 L stainless steel |
Bearings: CD4MCU stainless steel, nickel plated | |
Standard bearings: Nickel bindery, tungsten carbide | |
Bearing shaft: Nickel bindery, tungsten carbide | |
Measuring range | 2,5 – 1.500 l/min |
Size | ¾" up to 2 ½" |
Flow accuracy | ±1 % |
Repeatability | ±0,1 % |
Calilbration | Water (NIST traceable calibration); other media upon request |
Operating pressure | 69 bar |
Operating temperature | Up to 150 °C |
End connections | Tri-Clamp® |
Approvals | 3-A sanitary standard |
Measuring principle
Turbine meters Cox|Blancett

Turbine meters are volumetric meters. When the fluid passes through, a rotor is activated and the movement is either electronically or mechanically transmitted outside.
Accessories
- The F-to-I converter provides a 4 - 20 mA output in a two wire, loop powered configuration.
- The F-to-V converter offers a...