General information
Two or three point controller
e.g. for humidity and temperature
integrated sensor power supply otional
inputs: 0/4 ... 20 mA, 0/0.2 ... 1 V
or Pt100 and others
Technical data
| power supply | 230VAC, 11VA(incl. sensors), 45...55Hz |
| controller type | twoorthreepoint controller |
| controllerstructures | P/PD/PI/PID |
| A/D-transducer | resolution>15 bit |
| accuracy (timer) | 0.7 %/10ppm/K |
| datastorage | EEPROM |
| samplingtime | 210ms |
| measurement accuracy (analogue input) | 0.1% / 100ppm/K |
| outputs | 4 relays (2 per controller) |
| make contact (NO contact) | 3A at 250 VAC resistive load |
| output sensor supply (optional) | 15 VDC max. 60 mA |
| target value display | 4-digit can be retrieved using keys |
| actualvaluedisplay | 4digit |
| housing | panelhousing toDIN43700 black |
| housing dimensions | 144 x 72 x 135 |
| contacts | on theback usingscrewterminals |
| conductorcross section | 1.5mm2 |
| electromagneticcompatibility | .EN61326 |
| ambienttemperature | +10...+50°C |
| protective system, front | .IP50 |
| rear | IP20 |
| resistance to climatic conditions | 75%rh without condensation |
| Technical Data | |
| inputs | 0/4...20mA |
| 0/0.2...1V | |
| 100 ... 138.5 Ohm, 1000 ... 1385 Ohm | |
| or thermocouples see above | |
| voltage drop current input: | 1 V |
| voltageinput | 10MOhm |
| controlrange | depending onsensorused |
| displayrange | dependingonsensor used |
The login area provides you with additional information if you have access authorization.
Do you have questions on this product?
Your contact person:
Badger Meter Swiss AG