- to monitor the formation of condensed water
- with Polyga® humidity measuring element
General information
breaking capacity max. 250VAC
The hygrostat module on PCB with Polyga® measuring element is arranged on a base plate so that the measuring element is in an immediate proximity to the base plate.
Protected by the housing, relative humidity near to dew point can form inside. The base plate is adjacent to the cooling pipe and transfers the cold to the measuring element.
The set point can be set inside and has to be adapted to the local conditions. The microswitch of the hygro module switches a changeover contact potential-free. The FAS 250VAC does not require a supply voltage resp. auxiliary energy.
Technical data
| Technical Data | |
| Humidity | |
| scale range | 30...100%rh |
| range of operation | 35...95%rh |
| measuring element | Polyga®-measuring element, |
| water resistent | |
| measuring accuracy | +/-3.0%rh |
| switch | changeover contact |
| switching difference (microswitch) | |
| refering to 50%rh | approx. 4%rh |
| breaking capacity 250 V | |
| humidify | 3 (0.2) A |
| dehumidify | 5 (0.2) A |
| breaking capacity, min | 100mA, 20 DC / AC |
| medium temp. coefficient | -0.2%/K ref. to 20°C and 50%rh |
| allowable air speed | 15m/sec |
| Temperature | |
| scale range | +10 ... +60° C |
| measuring element | thermobimetal |
| switch | changeover contact |
| switching difference | approx. 1 K |
| breaking capacity 250 V | |
| heating | 10 (4) A |
| cooling | 5 (2) A |
| breaking capacity, min | |
| heating and cooling | 1 (1) A |
| General Data | |
| operating voltage | 24 or 250 V AC |
| 50 / 60 Hz |
The login area provides you with additional information if you have access authorization.
Do you have questions on this product?
Your contact person:
Badger Meter Swiss AG